01
Listen & Measure
We visit the space, take detailed field measurements, and talk through how you actually use the room — what works today, what doesn't, and what has to fit where.
How We Work • Full projects
How a project runs when we install it.
Most of what leaves our shop is a kit: parts cut, drilled, edge banded and labeled for you or your installer to assemble. Full design-to-installation projects are the part of our work we keep deliberately small — so each one gets the same person from the first visit to the final adjustment. This is how those projects run.
Miami-Dade • Broward • Palm Beach
A more considered way to build custom cabinetry.
Your project is not simply cut and delivered. The parts are made on our own production floor, then pre-assembled and checked in the shop before installation. We test hardware, alignment and fit before we arrive at your home.
Dedicated Attention
We install a deliberately small number of projects at a time, so you deal directly with the person running yours.
Prepared Off-Site
Components are inspected, organized, pre-assembled and adjusted in our shop before installation day.
Less Disruption at Home
Better preparation means fewer surprises, less cutting on site and a shorter, cleaner installation.
Our Shop
The parts are cut in our own shop.
Most studios draw the project and send the files out to be cut. We cut ours. Panels are nested and cut on our own CNC, edged and bored in the same shop, then assembled and checked before anything is loaded for your home.
It matters for one reason: when something needs to change, it changes here. Not on your kitchen floor, on a Saturday, with you watching.
Cut on Our CNC
Parts are nested and cut straight from the drawings we produced, so what reaches assembly is what was drawn and approved.
Edged in the Same Shop
Edges are applied on the same floor the parts were cut on, which keeps handling and waiting between steps to a minimum.
Sized and Bored in Our Shop
Panel sizing and System 32 boring happen in-house, so the schedule for your project is ours to hold rather than someone else's to fit in.
How a project runs.
02
Design Around You
Layout, finishes, storage and function, presented in 3D so you can see the result before anything is built. We adjust until it's right.
03
Detail & Coordinate
Shop drawings, hardware selection, tolerances and production files. The parts are then cut, edge banded and bored in our own shop, from the same file you approved.
The step most shops skip
04
Pre-Assemble & Inspect
Everything is received and counted in our shop, checked against the drawings, pre-assembled and adjusted. Problems get solved here — not in your kitchen.
05
Install With Care
Floors and surfaces protected, installation by our own team, final adjustments and a walk-through before we leave. We fix what needs fixing before we go.
Your home is not our workshop.
Most of the preparation should happen before installation day. By inspecting and preparing your cabinetry off-site, we cut down the work that has to happen inside your home and arrive organized for a clean, efficient installation.
Start your project.
Tell us about your space and what you'd like it to do. We'll follow up within one business day to see whether the project is a good fit for our schedule. Only need the parts? See cut-to-size and RTA kits.
Serving Miami-Dade, Broward and Palm Beach counties · (754) 308-9135
You measure. We manufacture. Custom cabinet parts and RTA kits, made in our South Florida shop.
Quick Links
Service Areas
- Miami-Dade
- Broward
- Palm Beach Counties
Contact Info
- Serving Miami • Broward • Palm Beach
- (754) 308 9135
- contact@m11designgroup.com
© 2026 M11 Design Group. All rights reserved. | Custom Cabinetry & Architectural Millwork
M11 Design Group is an operating trade name of RKS Holdings Group L.L.C.